Loading ...
Loading ...
Loading ...
6
4. Connecting to an external device for use (Plug and Wireless mode)
([ Please refer to “Connecting and Disconnecting with an Analog
Device” on pages 18.)
You can connect the charging case to a device such as an airplane stereo system, treadmill, cassette player, radio,
and TV to listen with the earbuds.
a Connect the USB-C™ port of the included USB-C™ to AUX cable to the charging case.
b Connect the AUX terminal to a desired device.
c Wear earbuds on your ears.
d Slide the Plug and Wireless mode switch to the right to turn on the mode. The indicator on the charging case
blinks green.
e When the charging case and earbuds are connected, the indicator turns off.
* To disconnect the external device, slide the Plug and Wireless mode switch to the left. The indicator on the
charging case blinks blue and the device is reconnected to the device that has been previously connected.
*Ifyoucannotndadevicewhichhasbeenpreviouslyconnected,itenterstheConnectablemode.
* Call function is not supported in Plug and Wireless Mode.
5. Charging ([ Please refer to “Charging by Wire”, “Description on
UVnano” on pages 20, 21.)
Wired charging
Connect the charging cable to charge the charging case with earbuds. The earbuds and charging case are charged
at the same time.
• If you charge the device with the earbuds attached and the cover closed, the UVnano LED operates for 10
minutes.
> Caution
• Please note that the temperature of the earbuds may become higher while the UVnano LED is operating.
Loading ...
Loading ...
Loading ...