Loading ...
Loading ...
Loading ...
You can use the rotating button to adjust the rear
handle to different positions to cut the hedges easier.
1. Pull the rotating button and turn the rear handle.
2. Release the rotating button until it locks into
position.
11 MAINTENANCE
CAUTION
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can
cause damage to the plastic, and make the plastic
unserviceable.
CAUTION
Do not use strong solvents or detergents on the
plastic housing or components.
WARNING
Remove the battery pack from the machine before
maintenance.
11.1 CLEAN THE MACHINE
WARNING
Keep the machine and the motor free of leaves,
branches or excessive oil to prevent fire risks.
• Use a moist cloth with a mild detergent to clean the
machine.
• Clean all moisture with a soft dry cloth.
• Use a small brush to clean the air vents.
11.2 LUBRICATE THE BLADE
To increase the efficiency and life of the blades,
lubricate them carefully after each work session:
• Do not oil the blade while the hedge trimmer is
running.
• Put the machine on a flat and smooth surface.
• Use a soft cloth to clean the blades and a brush to
remove more dirt.
• Use a light layer of oil to lubricate the blades along
the top edge of the blade.
NOTE
We recommend to use the non-pollutant type oil.
12 STORE THE MACHINE
NOTE
Clean the machine before storage.
1. Remove the battery pack.
2. Let the motor cool.
3. Check that there are no loose or damaged
components. If it is necessary, replace the
damaged components, tighten screws and bolts,
or speak to a person of an approved service
center.
4. Store the machine in a cool and dry location.
13 TROUBLESHOOTING
Problem Possible cause Solution
The motor does
not start when
you pull the trig-
ger.
The battery
pack is not in-
stalled tightly.
Make sure that
you tightly in-
stall the battery
pack in the ma-
chine.
The battery
pack is out of
power.
Charge the bat-
tery pack.
The machine
smokes during
operation.
The machine
has damage.
1. Immedi-
ately stop
the ma-
chine.
2. Remove
the battery
pack.
3. Speak to
service
center.
The motor is on,
blades do not
move.
The machine
has damage.
Do not use the
machine and
speak to service
center.
The blades are
blocked.
Remove battery
pack then clear
blockage from
the blades.
There is too
much noise
and/or vibration
during opera-
tion.
Loose parts.
1. Stop the
machine.
2. Remove
the battery.
3. Inspect for
damage.
4. Check and
tighten
loose
parts.
Damaged parts.
Do not use the
machine and
speak to service
center.
9
English
EN
Loading ...
Loading ...
Loading ...