Loading ...
Loading ...
Loading ...
8 9
2. Remote Pairing
(Follow these instructions if the bidet seat
is not responding to the remote)
a. Unplug the bidet seat.
b. Press and hold the “STOP” button on the remote until the indicator lights flash.
c. Hold the remote close to the bidet seat and plug it back in.
d. The indicator lights will stop flashing when the remote has successfully paired.
REMOTE INSTALLATION
a. Drill two 6mm holes on the wall that line up with the remote bracket.
b. Install the wall anchors in the newly drilled holes.
c. Place the remote bracket over the wall anchors.
d. Use the provided screws to attach the remote control bracket to the wall.
e. Place the remote control on the bracket.
1. Installation
Loading ...
Loading ...
Loading ...