Loading ...
Loading ...
Loading ...
6 7
SEAT INSTALLATION (CONT.)
5. Connect the Water Hose
1. Close the water shutoff valve.
2. Flush the toilet to empty the tank.
3. Remove the existing water supply hose from the tank.
4. Install the t-valve on to the tank. Ensure the rubber
gasket is properly seated inside the T-Valve.
5. Connect the 7/8” water supply hose to the water shutoff valve
and t-valve. If necessary, use the included conversion nut.
6. Connect the 1/2” water supply hose to the bidet seat and t-valve.
7. Open the water shutoff valve.
8. Check for any leaking or dripping.
• Plug the power cord into
a 120V power outlet.
• Please contact our service
center at 847-458-2334 if you
have any quesions.
6. Plug it in!
Loading ...
Loading ...
Loading ...