Loading ...
Loading ...
Loading ...
6
• If a long detachable
power-supply cord or
extension cord is used,
the marked electrical
rating of the detachable
power-supply cord or
extension cord should
be at least as great as
the electrical rating
of the appliance. If
the appliance if of the
grounded type, the
extension cord should
be a grounding-type
3-wire cord.
• In the unlikely event
the appliance develops
a fault, stop using
it immediately and
seek advice from the
Customer Support
Team:
+44 (0) 333 220 6066
Before First Use:
Read all instructions and safety information carefully before first use. Please retain this information
for future reference.
1. Remove the appliance from the packaging.
2. Check all components are present.
3. Clean the appliance according to the ‘CLEANING & CARE’ section, then reassemble it.
4. The appliance is now ready for normal use.
5. Dispose of the packaging in a responsible manner.
Using Your Appliance:
Milk Capacity
Always follow the maximum/ minimum markings inside the jug according to the function required:
Frothing milk 150ml MAXIMUM milk capacity
(Applies to both thick and thin froth and hot and cold milk)
75ml MINIMUM milk capacity
Warming milk 300ml MAXIMUM milk capacity
75ml MINIMUM milk capacity
Operation:
1. Remove the jug cover and insert the frothing paddle onto the shaft on the bottom of the jug.
2. Fill the jug with the required amount of milk (and in accordance with the milk capacity
instructions above) and replace the cover.
Note: Use whole milk (within a temperature range of 5-10ºC for warming milk)
3. Connect the plug into a power outlet.
4. Press the Function button as required and the corresponding LED indicator will illuminate:
ONCE
Warm milk with a thick froth
TWICE
Warm milk with a thin froth
THREE TIMES
Warm milk without froth
FOUR TIMES
Cold milk with froth
Loading ...
Loading ...