Loading ...
Loading ...
Loading ...
Available dynamic ranges include:
Auto
Rec. 709
Rec. 2020 SDR
HLG
ST2084 300
ST2084 500
ST2084 800
ST2084 1000
ST2084 2000
ST2084 4000
ST2084
Setup Page 4
The 4th page of ‘setup’ includes audio meter settings and filename options
Audio Meters
You can choose from two different audio meter display types.
VU The VU meter, or ‘volume units’ meter, averages out short peaks and troughs in
your audio signal. If you are using VU metering, adjust the input levels on the
HyperDeck Extreme 8K HDR so that the meter peaks at the 0db indicator on the
audio meter. This maximizes the signal to noise ratio and ensures your audio is at
the highest quality. If your audio peaks beyond the 0dB indicator there is a high risk
of sound distortion.
PPM PPM meters, or ‘peak program meters’ displays a ‘peak hold’ feature that
momentarily holds the signal peaks and a slow fall back so you can easily see
where your audio is peaking.
Both VU and PPM meters are available at reference levels of -18dB or -20dB so you can
monitor your audio to suit different international broadcasting standards.
To adjust XLR input levels on the ‘touchscreen display’, tap on the audio meter in the
bottom right corner. For more information, see the ‘audio monitor’ section under ‘lower
toolbar’ in this manual.
38Settings
Loading ...
Loading ...
Loading ...