Dewalt DCE511B Instruction Manual

Loading ...

English

Important Safety Instructions



WARNING! When using the jobsite

fan, basic precautions should always be followed,

including the following:

a ) Read all the instructions before using the jobsitefan.

b ) To reduce the risk of injury, close supervision is

necessary when a jobsite fan is used nearchildren.

c ) Turn the jobsite fan off, disconnect from power source

and remove the battery packs when not in use and

before servicing orcleaning.

d ) Do not operate any jobsite fan after it

malfunctions or is dropped or damaged in any

manner. Turn the jobsite fan off, disconnect

from power source and remove the battery

pack. Return jobsite fan to the nearest authorized

service facility for examination, repair, or electrical or

mechanicaladjustment.

e ) To reduce the risk of electrical shock, do not put

jobsite fan in water or other liquid. Do not place

or store jobsite fan where it can fall or be pulled into

a tub orsink.

f ) Only use attachments recommended or sold by

themanufacturer.

NOTE: This jobsite fan has a rating of IP54 which

means it has some level of protection from dust and

water ingress. Refer to IEC60529 IP54 for the specific

meaning of this rating. The battery does not have an IP

rating on its own. Do not submerge jobsite fan or battery

inliquid.

SAVE THESE INSTRUCTIONS

Specific Safety Rules for Jobsite Fans



WARNING: Fire hazard. Do not operate jobsite fan

or charger near flammable liquids or in gaseous or

explosive atmospheres. Internal sparks may ignite

fumes causing personalinjury.

• Do not wash jobsite fan with water or allow water to get

inside the fan. Do not submerge jobsite fan in water at

anytime.

• While jobsite fan is in use, do not cover with cloth or other

flammable materials due to increased risk offire.

• The jobsite fan is intended for commercial and household

use.

• Store the jobsite fan indoors when not inuse.

• Make sure extension cord is located so that it will not

be stepped on, tripped over, or otherwise subjected to

damage orstress.

• Use only a proper extension cord that is necessary to

operate the jobsite fan on AC power. Use of an improper

extension cord could result in risk of fire, electric shock,

orelectrocution.

• Disconnect the jobsite fan from the outlet before

attempting any cleaning. This will reduce the risk of

electric shock. Removing the battery pack will not reduce

thisrisk.

• The jobsite fan is designed to operate on 120 Volts, 60

Hz AC or on direct current (DC) through fully charged

DEWALT

20V Max* lithium-ion battery packs. Do not use

any othervoltage.



WARNING: Do not use the fan with any solid-

state speed controldevice.

• Use type SJ, SJO, SJT, SJTO, S, SO, ST and STO cord when

operating the jobsite fan on ACpower.



CAUTION: When not in use, place jobsite fan

on its back on a stable surface where it will not

cause a tripping or falling hazard. Some tools with

large battery packs will stand upright on the battery

pack but may be easily knockedover.

Additional Safety Information



WARNING: ALWAYS use safety glasses. Everyday

eyeglasses are NOT safety glasses. Also use face or

dust mask if cutting operation is dusty. ALWAYS WEAR

CERTIFIED SAFETYEQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CSA Z94.3),

• ANSI S12.6 (S3.19) hearing protection,

• NIOSH/OSHA/MSHA respiratoryprotection.



WARNING: Some dust created by power sanding,

sawing, grinding, drilling, and other construction

activities contains chemicals known to the State

of California to cause cancer, birth defects or

other reproductive harm. Some examples of these

chemicalsare:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-

treatedlumber.

Your risk from these exposures varies, depending on how

often you do this type of work. To reduce your exposure to

these chemicals: work in a well ventilated area, and work with

approved safety equipment, such as those dust masks that are

specially designed to filter out microscopicparticles.

• Avoid prolonged contact with dust from power

sanding, sawing, grinding, drilling, and other

construction activities. Wear protective clothing and

wash exposed areas with soap and water. Allowing

dust to get into your mouth, eyes, or lay on the skin may

promote absorption of harmfulchemicals.



WARNING: Use of this tool can generate and/

or disperse dust, which may cause serious and

permanent respiratory or other injury. Always use

NIOSH/OSHA approved respiratory protection

appropriate for the dust exposure. Direct particles

away from face andbody.

• Air vents often cover moving parts and should be

avoided. Loose clothes, jewelry or long hair can be

caught in movingparts.

The label on your fan may include the following symbols. The

symbols and their definitions are asfollows:

V ......................... volts

Hz .......................hertz

min ..................... minutes

or DC ......direct current

Loading ...

Dewalt DCE511B 11 in. Corded/Cordless Jobsite Fan (Tool Only)

Instruction Manual - Page 4