Loading ...
Loading ...
Loading ...
11
English
10 English
1. Touch to power on.
2. Select desired speed by pressing
. Speed is indicated by number of
lights illuminated:
3. Press
to activate timer. The
and Indicator Lights will
turn orange to indicate timer
adjustment mode. While in this
mode, select amount of time in
three-hour intervals by pressing
. After a few seconds, the
ashing orange Indicator Lights will
turn white, indicating you have left
timer adjustment mode.
The
will continue to glow orange
to indicate the timer is set.
4. To adjust timer setting,
press
.
5. To cancel timer, cycle through the
timer settings until off. You can also
press and hold
for 4 seconds.
The indicator lights will ash,
indicating the timer is off. When
timer is off, the will no longer
glow orange.
6. Press to turn oscillation on and
off.
You can also control the product
with Amazon Alexa. See GETTING
STARTED and USING ALEXA for
instructions.
HOW TO USE
OSCILLATION
TIMER
POWER ON/OFF
FAN SPEED
Before use, check appliance for visible damage. DO NOT USE THIS TOWER if there is evidence of damage. If any damage is found, contact
Vornado Air LLC at 1-800-234-0604.
SPEED/TIMER
INDICATOR
LIGHTS
Speed: TURBO
Timer: 12 HOURS
Speed: HIGH
Timer: 9 HOURS
Speed: MEDIUM
Timer: 6 HOURS
Speed: LOW
Timer: 3 HOURS
NOTE: Your tower fan is
equipped with a photodetector
sensor. The brightness of the
control display will automatically
adjust based upon the amount
of light
detected in the room.
GETTING STARTED
Before product setup, download or update the Amazon Alexa app from your mobile device's app store and ensure your phone is connected to
your 2.4 GHz WIFI network.
1. Plug your Vornado OSCR37 AE into an electrical outlet.
2. Open the Alexa app and tap the MORE icon to add a device. Follow the on-screen instructions. If prompted by the app, scan the
2D barcode located on the product.
3. Once successfully connected, a message will appear in the Amazon Alexa app and the power button on your OSCR37 AE will be
illuminated blue. Your fan is ready to use.
FACTORY RESET: If for any reason, there is a problem with your product or you wish to disconnect the product from your network
you can reset it to factory settings. Simply press and hold the POWER and TIMER buttons for 10-15 seconds or until the entire control
panel begins to ash. To reconnect your Vornado OSCR37 AE, follow steps above.
Loading ...
Loading ...
Loading ...