Loading ...
Loading ...
Loading ...
Controlsand Features
4
f
Chute Assembly
Drift Cutter t
/
Tool
Headlight t
_) Shift Lever t
_!'J=Way/2=Way Chute Directional Control t
_ __=== Auger Control
Control
Overhead Chute
f
Standard Chute
Directional Control t
Augers
t if Equipped
U=Joint Chute
Directional Control t
Figure 4=1
Snow thrower controls and features are described below and
illustrated in Fig. 4-1.
Shift [ever (If soEquipped)
The shift lever is located on the handle panel and is used to
determine ground speed and direction of travel.
Forward
There are six forward (F) speeds. Position one (1) is the slowest
and position six (6) is the fastest.
Reverse
There are two reverse (R) speeds. One (1) is the slower and two (2)
is the faster.
SkidShoes
Position the skid shoes based on surface conditions. Adjust
upward for hard-packed snow. Adjust downward when
operating on gravel or crushed rock surfaces. See Set-Up &
Assembly section.
Augers
When engaged, the augers rotate and draw snow into the auger
housing.
ChuteAssembly
Snow drawn into the auger housing is discharged out the chute
assembly.
Headlight (Ifs0Equipped)
The headlight is located on top of the handle panel and is
automatically turned on when the engine is started.
Loading ...
Loading ...
Loading ...