Fanimation FP7996BLBNW Pickett 52-in Black with Brushed Nickel Accent LED Indoor/Outdoor Ceiling Fan with Light Wall-mounted 4-Blade

Installation Manual - Page 9

For FP7996BLBNW.

PDF File Manual, 33 pages, Download pdf file

Loading ...
Loading ...
Loading ...
x 4WIRE
CONNECTORS
HARDWARE USED:
9
How to Wire Your Ceiling Fan
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before
wiring.
(Figure 1).
WARNING
WARNING
MAIN FUSE BOX
Figure 1
Figure 2
NOTE:
If you are not sure if the outlet box is
grounded, contact a licensed electrician for advice, as
it must be grounded for safe operation.
1. Disconnect the power and remove the existing
wall plate and switch.
2. Set the knob and light switch of the wall-mounted
control in the off (0) position.
3. Make wire connections and secure with wire nuts
supplied. (Figure 2)
Connect the Black wire (AC IN L) from the
wall-mounted control with the wire from the AC
power supply.
Connect the White wire from the ceiling fan to
the AC power supply.
Connect the Black wire (To Motor L)from the
wall-mounted control with the Black wire from the
ceiling fan.
Connect the Blue wire (To Light) from the
wall-mounted control with the Blue wire from the
ceiling fan.
Connect the green/yellow wire from the
wall-mounted control with ceiling fan and ground
wire from the AC power supply.
4. Carefully push all connected wires inside wall
switch box.
NOTE: If fan or supply wires are different colors than indicated, ha
Check to see that all connections are tight,
including ground, and that no bare wire is visible at
the wire connectors, except for the ground wire. Do
not operate fan unless blades are in place. Noise
and fan damage could result.
Black
Black
Black
Black
White
Ground
Green
Blue
Blue
Green
120V AC
SUPPLY
SOURCE
AC IN L
To Light
To Motor L
Figure 3
Light Switch
Screw
Fan Speed
Switch
Outlet Box
5 . Secure the wall-mounted control to the outlet box
with two screws provided. Then attach the face plate
to the wall control with the two painted screws.
(Figure 3)
Loading ...
Loading ...
Loading ...