Loading ...
Loading ...
Loading ...
How to Install Your Canopy Housing
2. Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket
utilizing the keyslot twist-lock feature. (Figure 2)
1. Remove one of the two shoulder screws in the
hanger bracket. Loosen the second shoulder screw
without fully removing it. Assemble canopy by
rotating key slot in canopy over shoulder screw in
hanger bracket. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that
was previously removed. (Figure 1)
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
NOTE: This step is applicable after the neccessary wiring is completed.
Canopy
Canopy Screw
Cover
Figure 1
10
How to Assemble Your Ceiling Fan Blades
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.
CAUTION
NOTE: Periodically check blade hardware and
resecure if necessary.
1. Slide blades through slots in motor housing and
attach to the motor hub using the 3/16˝-24 serrated
head screws and flat washers. Make sure the screws
securing the blades to the motor hub are tight and
are properly seated. (Figure 1)
Blade
Motor
Figure 1
Figure 2
HARDWARE USED:
x 12
x 12
FLAT WASHER
ß
SERRATED HEAD
SCREWS
3/16˝-24 Serrated Head Screw
with Flat Washer (3 per blade)
Loading ...
Loading ...
Loading ...