Loading ...
Loading ...
Loading ...
www.PyleUSA.com
7
Remote Control
1. Digital display
2. Auto charging
3. Scheduling button
4. Direction buttons
5. ON/OFF
6. Mode selection
7. Spot cleaning
8. Scheduling button
Switch on robot, then point it towards the robot to operate it.
1. ON/OFF button: The robot in standby status, press ON/OFF button, the robot
start cleaning. The direction button can control its working direction.
2. Scheduling function: The robot in standby status, press PLAN button can
schedule working. Press PLAN button for 3 seconds for scheduling. When
scheduling succeed, the indicator will ash pink for three seconds with a beep,
and 24 hours later, the robot will work automatically. Press PLAN button for 3
seconds again, the indicator will ash pink for three seconds with two beeps,
the scheduling cancel.
3. Auto charging: Press HOME button, robot will go to charge automatically,
press HOME button again or press ON/OFF button, it will stop there.
4. Spot cleaning: Press SPOT button, the robot will go to spot cleaning mode
and increase suction.
5. Mode Function: Press MODE button and robot will change its working mode.
(Mode 1: spiral cleaning. Mode 2: auto cleaning. Mode 3: edge cleaning. Mode 4:
Zig-zag cleaning.)
Note:
A. Install two AAA type batteries into the remote control before use.
B. Remove the batteries if the remote control will be left unused for a long period.
C. If you use the remote control near the charging station, the robot may not
recognize the command and may not work.
1
2
4
7
8
3
6
5
CLK
Loading ...
Loading ...
Loading ...