Loading ...
Loading ...
Loading ...
34 35
BRITAX Child Safety, Inc. EMBLEM/ALLEGIANCE User Guide
Replacing the Cover
1. Fit the child seat cover
around the child seat
shell.
2. Replace the belly pad and
buckle:
a. Turn the buckle
retainer sideways
and route it through
the belly pad.
b. Route the belly pad
and buckle retainer
through the buckle
slot in the cover.
– Ensure that the
buckle is through
the desired cover
slot for the buckle
position.
c. Slide the end of the
belly pad over the
comfort foam on the
child seat.
d. Turn the buckle
retainer sideways
and route it through
the front buckle
slot and then into
the desired buckle
position in the child
seat.
3a
3c
3d
3b
8. Remove the cover from
the shell.
3. Attach the plastic hooks
to the bottom edge of the
child seat.
4. Slide the head restraint/
head pad cover over the
harness adjuster. Attach
the elastic straps to the
rear tabs.
EMBLEM: Attach the
hook and loop fasteners
at the back.
5. Attach the hook and
loop fasteners on the
head restraint/head pad
cover around the harness
straps.
Harness Buckle
If your child eats and drinks while in the child seat, you will
need to check the buckle periodically and rinse out any
accumulated debris.
Removing the Harness Buckle
1. Lift the cover from the
seat to find the buckle
strap connection.
2. Remove the buckle strap
by turning the buckle
retainer sideways and
routing it out of the front
buckle slot in the child
seat.
Loading ...
Loading ...
Loading ...