Loading ...
Loading ...
Loading ...
22 23
BRITAX Child Safety, Inc. EMBLEM/ALLEGIANCE User Guide
Adjusting the Harness Buckle Position
• For rear-facing installation:
– ALWAYS position the buckle in
the inner slot for when using a
vehicle seat belt installation.
– The vehicle belt must pass in
front of the buckle strap.
– Position the buckle in the slot
closest to but not under the child when using the lower
anchor installation.
• For forward-facing installation, use the outer buckle
slot when installing the child seat with a child weighing
30 lbs (13.6 kg) and above or if the buckle is under the
child in the inner position.
• NEVER leave the buckle in the adjustment slot.
Child Seat Functions
Adjusting the Harness Height
• In rear-facing mode, the harness straps should be
in the closest position at or below your child’s
shoulders. See page 7.
• In forward-facing mode, the harness straps should
be in the closest position at or above your child’s
shoulders. See page 7.
1. Loosen the harness.
a. Lift harness adjuster
lever.
b. Pull both harness straps
forward.
2. Squeeze the harness
height adjuster, slide the
harness into the desired
position and release.
3. Ensure the harness has
locked into position.
ADJUSTMENT
SLOT
1b
1a
Using the Harness Buckle
To Fasten:
1. Insert one tongue at a time
into the buckle. Proper
connection is confirmed
with a click after inserting
each buckle tongue.
To Release:
1. Press the release button
and pull the tongues from
the buckle.
NOTE: Periodically clean
the buckle to ensure proper
operation. See page 40.
a
b
Using the Chest Clip
1. Open the chest clip.
a. Press tabs.
b. Pull apart.
2. Push together
to fasten.
NOTE: Always
position the
chest clip at
armpit level.
1. Unbuckle the harness and
remove the buckle. See
page 35.
2. Route the belly pad
and buckle through the
desired slot in the cover.
NOTE: Slide the end of
the belly pad over the
comfort foam.
3. Slide the buckle retainer
into the front buckle
slot and slide into the
corresponding buckle
position. Ensure the red
release button faces out.
Replace cover.
Loading ...
Loading ...
Loading ...