Loading ...
Loading ...
Loading ...
CLEANING
WARNING
• Always remove the power cord before cleaning.
• Never immerse the motor block in water. It could result in an electric shock or
fire.
• The cutting surfaces of the inserts are sharp. Injury may occur! Always touch
the inserts on the plastic.
CAUTION
• Do not use a wire brush or other abrasive utensils for cleaning.
• Do not use aggressive or abrasive cleaning agents.
NOTE
Colour residues from vegetables (e.g. carrots) could be removed best with a
cloth and cooking oil.
Immediately clean the appliance after each use.
ACCESSORIES
1. For opening, turn the feed neck counterclockwise.
2. Remove the insert holder by turning it into the "OPEN" direction and pull it out
upwards.
3. Remove the attachment from the insert holder by pressing the lock button.
(See the figure 5)
4. For easy cleaning, the blades can be removed from the attachments.
5. You may rinse the accessories in a bowl of hot water and then dry them.
HOUSING
1. Clean the housing with a moist towel.
2. Remove any residual water with a dry cloth.
TECHNICAL DATA
Power supply 110-120V~ 60 Hz
Power consumption 100W
Protection class II
Short-term operation 2 minutes
Net weight approx. 1.97 kg
OPERATION
1. Tum on the appliance with the ON/OFF button.
2. Put your food as upright as possible into the feed neck.
WARNING!
• The tip of the food pusher has sharp edges. Risk of injuries
• Never put your fingers or tools into the feed tube!
CAUTION! The vertical insertion has a considerable influence on the result.
3. If the container is full or your food is used up, turn off the appliance with the
ON/OFF button.
4. Pull out the food pusher from the feed neck.
NOTE - A bit of food will remain onto the food pusher.
END OF OPERATION
Disconnect the plug from the outlet.
CABLE STORAGE
Push the power cable back into the cable storage.
6 7
Loading ...
Loading ...
Loading ...