Loading ...
Loading ...
Loading ...
OPERATINGiNSTRUCTIONS
Start-up Procedure
1. Makesurewatersupply is connectedandturned on.
2. Releasegun safetyif locked.
3.Toallow airto escapefromthe hose,squeezetrigger on thegun until thereisa steadyflow ofwater
comingout from the nozzle.
Starting Engine
1. Check oil and gas.
2. Connect hose and turn on water.
3. Squeezetrigger.
4. Make sure the pressure washer is on the ON position (illustration 1).
5. Set the fuel valve to open (illustration 2).
6. Set choke if available (illustration 3) & set throttle to slow (illustration 4).
7. When starting engine, pull cord slowly until resistence is felt, then pull rapidly.
8. If engines starts and fails to continue running or if increase resistance is felt during starting pull attemps
repeat step 3 - 7.
1) ON/OFFSwitch
3) Choke
2) FuelValve
4) Throttle Control
Loading ...
Loading ...
Loading ...