Loading ...
Loading ...
3
WARNING: This product is equipped with a polarized plug (one blade is wider than
the other blade) to reduce the risk of electrical shock. This is a safety feature. The
plug will fit into a polarized outlet only one way. If you are unable to insert the plug
into the electrical outlet, try reversing the plug. If the plug still does not fit, contact a qualified
electrician. Never use the plug with an extension cord unless you can fully insert the plug
into the extension cord. Do not alter the plug. Do not attempt to defeat the safety purpose
of the polarized plug.
Overload Protection Fuse
This product employs overload protection (fuse). A blown fuse indicates an overload
or short-circuit situation. If the fuse blows, unplug the product from the outlet.
Replace the fuse by following the servicing instructions below (follow product marking
for proper fuse rating). If the replacement fuse also blows, a short-circuit may be
present and the product should be discarded, or call the customer assistance to
arrange for a possible product repair.
• Grasp plug and remove it from the receptacle or other outlet
device. Do not unplug by pulling on cord.
• Select a suitable tool such as a small flat screwdriver.
• Open the fuse access cover by sliding or prying it open.
• Carefully remove the fuse by prying it out from one end or by turning the fuse
holder over.
• Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse. Gently press the new fuse
into the slot at both ends. Do not press on the glass tube.
• Close the access cover until it is flush with the plug face.
• Do not replace the plu. It contains safety devices (fuse, AFCI, LSDI) that should not
be removed. Discard the product if the plug is damaged.
Tips
• Do not use excessive force when replacing the fuse or damage to the fuse or plug
may occur.
• If it’s hard to close the access cover, make sure the fuse is fully inserted.
FAN STORAGE:
Make sure to store it in a safe and dry location away from the reach of children. We
recommend using a dust cover to protect the fan from dust, place it away from where
parts can be damaged.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
Loading ...
Loading ...
Loading ...