Loading ...
Loading ...
Loading ...
EVERSE 8 Amplifier DSP | en 41
Electro-Voice
User manual
2022-10 | 02 | F.01U.401.530
MODE menu
The MODE menu is used to configure the type of sound the loudspeaker delivers.
Available options for this selection are: MUSIC, LIVE, SPEECH and CLUB.
– MUSIC - is used for recorded music playback and electronic dance music applications.
– LIVE – is used for live sound applications.
– SPEECH – is used for spoken word applications.
– CLUB – is used for recorded electronic music playback.
The default is MUSIC.
LOCATION menu
The LOCATION menu is used to optimize the loudspeaker for different boundaries.
Available options for this selection are: TRIPOD, KICKBACK, MONITOR.
– TRIPOD - is used when the loudspeaker is placed on a tripod stand or placed on a pole.
– KICKBACK - is used when the loudspeaker is placed on the angled rear kickback position.
This setting compensates for the amount of low frequency boost created by placing the
loudspeaker on a level and stable flat surface.
– MONITOR - is used when the loudspeaker is placed on the angled monitor panel in
monitor position. This setting compensates for the amount of low frequency boost
created by placing the loudspeaker on a level and stable flat surface.
The default is TRIPOD.
SUB menu
The SUB menu is used to select a high pass frequency for use with a subwoofer.
Available options for this selection are: OFF, 100Hz, 120Hz, 150Hz, ELX200-12SP,
ELX200-18SP, EKX-15SP and EKX-18SP. The 100Hz, 120Hz, and 150Hz choices are generic
high pass settings for use with other subwoofers. The ELX200-12SP, ELX200-18SP, EKX-15SP
and EKX-18SP settings are specifically optimized for subwoofers by including delay for best
summation.
The default is OFF.
TREBLE control
The TREBLE control is used to adjust the high frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a high shelving filter.
The default is 0dB.
MID control
The MID control is used to adjust the midrange frequency performance of the loudspeaker for
different applications or personal preference.
The default is 0dB.
BASS control
The BASS control is used to adjust the low frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a low shelving filter.
The default is 0dB.
MAIN PEQ menu
The MAIN PEQ is used to adjust the frequency response of the loudspeaker for different
applications or personal preference. There are seven equalization filters available.
The filter type is selectable between the following:
PEQ - Parametric Equalization Filters shape the sound using peak/dip bell shaped filters which
have three controls.
– Q - Quality Factor defines the bandwidth width of the filter. A lower Q provides a wider
bandwidth and a higher Q provides a narrower bandwidth.
– FREQ - selects the center frequency of the EQ filter.
Loading ...
Loading ...
Loading ...