INSTRUCTION MANUAL
Package List
Without further ado, we kindly suggest you to list all parts needed
for the chair first.
2
(A)x1 Chair Back (B)x1 Chair Seat
(C)x1(L)x1(R) Armrests
(D)x1 Seat Mechanism (E)x5 Casters (F)x1 Gas Lift
(G)x1 Chair Base (H)x4 Bolt M6x20 (I)x6 Bolt M6x35
(K)x1 Allen Wrench
(J)x4 Bolt M6x20
Assembly Instruction
Step 1:
Insert Casters (E) into the Chair
Base (G). Then insert Gas Lift (F)
into the hole in the
center of the Chair Base (G).
Attach the Armrest (C) to the Chair
Seat (B) using Bolts (I) by Allen
Wrench (K) as shown.
Step 2:
1
2
3
Tighten the bolts completely.
*NOTE:
F
G
E
C
B
I
I
I
I
I
I
K
Attach the Seat Mechanism (D)
to the bottom of the Chair Seat (B)
using Bolts (H) by Allen Wrench (K)
as shown.
Position the assembled Chair Seat
upright with the Seat Mechanism (D)
facing down.
Insert the Gas Lift (F) into the center
hole of the Seat Mechanism (D) and
press down until fully engaged.
3
4
5
4
Step 4:
Step 3:
Tighten the bolts completely.
*NOTE:
F
D
H
D
H
H
H
K
5
6
Attach the Chair Back (A)
to the Armrest (C) using
Bolt (J) by Allen Wrench
(K) as shown.
Step 5:
5
Tighten the bolts completely.
*NOTE:
J
J
C
A
C
Hold the armrest pad to flip
up/down the armrests.
6
6
Instructions For Use
Armrests
While seated, reach the right side
of the chair to find the handle. Lift
and raise your body up slightly to
allow the chair to rise to the desired
height. To lower the seat, lift the
handle while applying more weight
downward on the seat. The chair will
descend until the handle is released or
the chair reaches the bottom position.
Chair Height
A
B
B
A
7
7
D
C
Reach under the front center of the
chair, grasp the round knob and turn
it counter-clockwise to stiffen the tilt
mechanism. Turn the knob clockwise
to loosen the tilt mechanism. Rotate
the knob until the desired resistance is
reached.
Tilt Tension
C
While seated, reach under the right side of the chair to find the height
adjust-ment handle. Pull the handle all the way out (away from the
gas lift) to allow the chair to tilt backwards. To lock the chair in the
upright position, push the handle in (towards the gas lift).
Tilt Lockout
D
Safety And Maintenance
Safety Information
9
Do not stand on the chair, Do Not use the chair as a stepladder.
Use this product for seating one person at a time.
Do not use the chair unless all bolts and screws are firmly secured.
Avoid contact with sharp objects to prevent puncturing the fabric.
Every 6 months, check all bolts and screws to ensure they are tight.
To clean, spot clean only using a damp towel and mild cleaner, first
test on a small, unseen area of fabric.
Chair weight limit not to exceed 275 lbs.
Sit in the center of the
chair, with your back to
the backrest
Do not push the chair
around when a person
is sitting in it
Do not push down on
the backrest when a
person is reclined
Do not place all your
weight on only the
backrest
Do not sit at the front
edge of the chair
Do not stand on the
chair
Do not use the chair
with more than one
person
8
