Loading ...
Loading ...
Loading ...
When you open the box, you will see the distilled water machine, which is divided
into two parts: Machine head and Machine body. After taking it out of the box, lift
the upper cover to take out the water storage bucket in the machine.
Lift up the Machine head and pour water into the stainless steel tank of the fuse-
lage to the maximum water level with a kettle. Do not exceed the maximum water
level. (if hot water is injected, the distillation time can be shortened) (Fig. 3).
Place the Machine head on the fuselage according to the direction (Fig. 4) (be sure
to place it rmly), and plug the power cord of the upper cover into the socket on
the fuselage.Or press the on button on the main screen to turn on the machine,
and then press the on button on the main screen to turn on the machine, and then
turn on the machine.
-4-
USAGE
1.
2.
3.
When the tap water is lled to the scale mark, the machine with a capacity of 4 liters
and a power of 750 watts needs to be heated to a boiling temperature to more than
20-30 minutes. The water begins to drip into the water storage tank and distills all
4 liters of water for about 4 hours (depending on the local ambient temperature).
After the production process, the anti-drying temperature control element auto-
matically cuts o the power supply. When opening again, the temperature of the
stainless steel liner must be reduced to below 70 ° C otherwise, if the temperature
is above 70 ° C, the temperature control element is still in the normally open alarm
protection state, and is unable to reset and start normally.
4.
(Fig. 4)(Fig. 3)
Water
Full Maximum
Water Level
Machine Body
Head Power Line
Main Power Line
Loading ...
Loading ...
Loading ...