Water Distiller with Screen
Instruction Manual
-1-
Open the package and examine the following items carefully to determine whether it
has the following items:
Dear user,
Thank you for purchasing our water purier! From now on, your family can drink fresh,
pure, homemade distilled water every day all from the comfort of your home.
Please store the foam packaging. Do not throw them away as they can be used later
for storage or transportation.
The distilled water machine can produce up to 4 liters of distilled water (equivalent to
2 thermos bottles) in about 4 hours (depending on the local ambient temperature)
and can easily produce at least 20 liters (equivalent to 10 thermos bottles) of distilled
water in one day, which is enough for your family to drink. The machine is easy to
operate, safe and reliable, and low cost (it only costs one kilowatt to produce 1300cc
distilled water). It is an ecient, excellent way to make fresh, distilled water at home.
Distilled Water Machine
Water Storage Bucket
Bucket Cover
Water Outlet
Main Power Line
Cleaning Agent
Instruction Manual
1.
2.
3.
4.
5.
6.
7.
A. Machine Head
B. Machine Body
C. Head Power Cord
D. Main Power Line
E. Big Bucket Lid
F. Small Bucket Lid
G. Stainless Steel Outlet Nozzle
H. LCD Control Panel
I. Glass Bucket
V. Fuse Receptacle
(Fig. 1)
-2-
The circuit board has 4 setting keys in total: 1 (set), 2 (+), 3 (-), 4 (on / 0)
1.Turn on and o:
Press 4 keys (LCD is "on / o" button), the machine is turned on, and LCD displays "on"
status. Press the 4 key again (the LCD is "on / o" button) to turn it o.
2. Countdown timing setting:
Press the 4 key (on / o) once, the machine will turn on, and the LCD will display "on"
status. Press the 1 key (the "set" button on the LCD screen) to display the "00:00"
status. Press the 2 key and 3 key (corresponding to the "+" - "button on the LCD screen)
to add or subtract the time, and continuously press the 1 key (the" set "button on the
LCD screen) can be changed within hours and minutes. After setting the time, it will
automatically enter the countdown state within 5 seconds (do not touch any key) or
long press key 1 (the "set" button on the liquid crystal screen) for 3 seconds. After
ashing the screen, it will directly enter the countdown state. If it needs to be reset,
long press key 1 (the "set" button on the LCD) for 3 seconds to enter the setting time
state again.
In the timing state, press key 4 again (the LCD is "on / o" button) to exit the timing
state, and the machine will be shut down immediately.
LCD PANEL EXPLANATION
SET
ON/OFF
(Fig. 2)
Rated voltage: 110V-120V, capacity: 4L
Rated frequency: 50 Hz; distillation capacity: 1 L / h
Rated power: 750W overtemperature protector: cut o temperature 115 ° C
Special model
Rated voltage: 110V-120V, capacity: 4L
Rated frequency: 50 Hz; distillation capacity: 1 L / h- 2 L / h
Rated power: 750W overtemperature protector: cut o temperature 115 ° C
Fill the water to the highest water level is 4 liters of water, and dry it in about 4 hours
(3-5 hours are normal range, the measurement time is calculated according to your
own machine).
Suggestions for making distilled water:
500 ml water (dry for about 25 minutes), and the timing is about 18 minutes - 23 minutes
1 liter of water (dry for about 1 hour), and the timing is about 30 minutes to 45 minutes
2 liters of water (dry in about 2 hours), timer 1 hour 30 minutes - 1 hour 45 minutes
3 liters of water (dry in about 3 hours), timer 2 hours 30 minutes - 2 hours 45 minutes
4 liters of water (dry in about 3 hours), timer 3 hours 30 minutes - 3 hours 45 minutes
Considering that the resistance value of heating pipe of each machine is dierent
(there is the oating dierence within the allowable range of the state) and the volt-
age dierence of each family, the power of each machine is dierent, and the climate
and temperature in dierent places also have certain inuence on the machine, and
the production time will be dierent. Therefore, the time provided by us is only for
reference, and the details should be based on ourselves The machine is groping and
adjusting.
Another reminder: there is a dierence in the timing of making pure dew and distilled
water, because the water absorption of various ower materials and medicinal materi-
als and residual water at the bottom of the pot should be considered when making
the pure dew. When doing, more water should be put in, or less time should be count-
ed to avoid drying the paste pot. The water absorption of various materials varies, as
well as the amount of residual water needed to avoid drying the pot each time. The
specic operation and accurate time still need to be explored by ourselves. We are
also welcome to discuss with us at any time.
When making pure dew, the calculation of time is only based on the amount of water
initially put in, not other materials. (because there are too many varieties of ower materi-
als, dierent sizes of owers and materials can not be excluded from the calculation.)
-3-
SPECIFICATIONS
TIME TO DISTILL AND MAKE WATER
When you open the box, you will see the distilled water machine, which is divided
into two parts: Machine head and Machine body. After taking it out of the box, lift
the upper cover to take out the water storage bucket in the machine.
Lift up the Machine head and pour water into the stainless steel tank of the fuse-
lage to the maximum water level with a kettle. Do not exceed the maximum water
level. (if hot water is injected, the distillation time can be shortened) (Fig. 3).
Place the Machine head on the fuselage according to the direction (Fig. 4) (be sure
to place it rmly), and plug the power cord of the upper cover into the socket on
the fuselage.Or press the on button on the main screen to turn on the machine,
and then press the on button on the main screen to turn on the machine, and then
turn on the machine.
-4-
USAGE
1.
2.
3.
When the tap water is lled to the scale mark, the machine with a capacity of 4 liters
and a power of 750 watts needs to be heated to a boiling temperature to more than
20-30 minutes. The water begins to drip into the water storage tank and distills all
4 liters of water for about 4 hours (depending on the local ambient temperature).
After the production process, the anti-drying temperature control element auto-
matically cuts o the power supply. When opening again, the temperature of the
stainless steel liner must be reduced to below 70 ° C otherwise, if the temperature
is above 70 ° C, the temperature control element is still in the normally open alarm
protection state, and is unable to reset and start normally.
4.
(Fig. 4)(Fig. 3)
Water
Full Maximum
Water Level
Machine Body
Head Power Line
Main Power Line
-5-
After the distilled water is nished, please open the upper cover 10-20 minutes
later. The correct operation of opening the upper cover is shown in Figure 7 to pre-
vent the internal residual steam from overowing and scalding. The machine can
work continuously. When distilled water is needed, add water again and restart the
machine.
It is forbidden to open the upper cover during the distillation process or immedi-
ately after the distilled water is prepared. If it is necessary to open the distilled
water machine midway, the machine must be shut down rst, the power cord must
be pulled out, and after 10-20 minutes of waiting, the operation shall be carried out
in strict accordance with (Fig. 5) to open the upper cover to avoid scalding by steam
overow.
5.
The rst and second barrels of distilled water should not be drunk. This is done by
cleaning the machine itself with high-temperature steam. There may be impurities
or traces of oil in the production process and packaging process inside the new ma-
chine. If you need to drink the distilled water, please make a few more barrels of
water and let the machine clean up the internal circulation before drinking. It is
necessary to do high-grade steam for medical and laboratory use distilled water
must be obtained from the machine, and more than two barrels of distilled water
should be made every day for one week to thoroughly purify the inside of the ma-
chine, so as to reach the medical standard and the rst class national laboratory
standard.
After distilled water or pure dew, please immediately clean the stainless steel parts
inside the machine (stainless steel tank, stainless steel upper cover, etc.) and keep
it dry (especially to remind that the liquid such as pure dew is weak acid and corro-
sive to stainless steel, and also reminds the tap water in many places to have similar
phenomenon). In a word, keep the inside and outside of the body as dry as possi-
ble, especially the socket part, to prevent short circuit of power supply. This kind of
maintenance can eectively extend the service life of the machine.
6.
7.
(Fig. 5)
Correct Operation
Wrong Operation Wrong Operation
(Fig. 8)
*The stainless steel ring is circled,locked on the handle and xed in two slots of the glass bottle.
Put in
Remove the stainless
steel water outlet
Stainless steel
water outlet
Activated carbon
package
Replace the activated
carbon package
Citric acid
cleaning agent
-6-
Removal of stainless steel outlet nozzle and replacement of activated carbon pack-
age. The new activated carbon bag needs several times of distilled water purica-
tion before it can be used normally. For household use or as pure dew, the activat-
ed carbon bag can or can not be put (it can't be used as pure dew). It is only used
for medical or laboratory use and requires high level of distilled water, so it is neces-
sary to put activated carbon. When using activated carbon, the activated carbon
bag should be replaced every 3-5 months.
8.
The glass bucket is made of high borosilicate and can be cleaned and disinfected
with high-temperature boiling water. The capacity of the bucket is 4 liters. Howev-
er, due to the bottle neck, the scale can not be marked, so the scale can only reach
3000ml.
9.
(Fig. 6) (Fig. 7)
The inside of stainless steel tank should be cleaned with clean water every day.
Every month (or depending on the amount of dirt in the tank mouth), please use
the stainless steel tank cleaning agent recommended by our company to remove
the dirt (Fig. 7). Inject (hot) water into the stainless steel tank until it is slightly
higher than the dirt performance.
Pour one to four tablespoons (depending on the amount of dirt in the tank) into
the tank.
Do not cover, plug in the main power supply and press the start button to heat the
stainless steel tank. After 15-30 minutes, pour out the water and rinse the interior
with clean water. If all the dirt cannot be removed once, the above actions can be
repeated. The residual dirt is not harmful to your health. Please feel free to use it.
Please wipe the inside and outside of the body with neutral detergent and keep it dry.
CLEANING METHOD
1.
2.
3.
-7-
PRECAUTIONS
COMMON FAULTS AND FAULT ANALYSIS
If the main power cord is not plugged in tightly or cannot be plugged tightly, plug
in the main power cord again or replace the household power cord (this power
cord is the universal power cord for home, computers, soymilk machines, rice cook-
ers, etc.).
The voltage at home is unstable. Please unplug other electrical appliances and try
the machine again. Or use a multimeter to measure the voltage at home.
If both 1 and 2 are excluded, please follow the steps below (Fig. 8) to conrm
whether the upper part of the machine does not work or the lower part does not
work.The machine is divided into upper and lower parts. The lower body is the
heating part, and the upper cover is the condensation part. At this time, you can
use the method of changing the plug to conrm
1.
2.
3.
Please read the manual carefully before using this machine.
The use of distilled water machine should be in a place that is not damp and well
ventilated. Because the cooling fan will produce the sound similar to the electric
fan, it is recommended that you should use it in a large living room with good ven-
tilation.
Please use the 110V-120V socket, and pay attention not to use a variety of house-
hold appliances at the same time in order to avoid overload.
Do not make the power cord clip damaged, cut or burned to cause leakage.
Please unplug the power cord from the socket when lling water, cleaning or not in use.
Do not immerse any part of the distilled water machine in water.
Do not allow children to operate the distilled water machine, so as to avoid scald-
ing caused by overturning.
Do not take o the top cover of the distilled water machine in action. Take o the
upper cover 10 minutes after the distilled water machine is nished, so as to avoid
scalding.
Do not use steel velvet (brush) or other hard objects (scraping) to clean the stain-
less steel tank, so as to avoid damage to the surface (bottom) of the tank and more
likely to be stained with dirt.
1.
2.
3.
4.
5.
6.
7.
8.
9.
The machine does not start properly.
