Loading ...
Loading ...
Loading ...
14
Figure 9-3: wheel dressing
9.6 Cleaning
Metal shavings may still be hot
from recent grinding operations. Make sure
shavings and debris are cold before cleaning
the grinder.
Avoid use of the following
cleaning chemicals or solvents: gasoline,
carbon tetrachloride, chlorinated solvents,
ammonia and household detergents containing
ammonia.
Brush all shavings from motor housing, tool rest,
and wheel guard. Check grinding wheel for cracks
and chips. Replace if damaged.
9.7 Lubrication
All motor bearings are permanently lubricated and
sealed at the factory and require no additional
lubrication.
9.8 Additional servicing
Any other servicing should be performed by an
authorized service representative.
Loading ...
Loading ...
Loading ...