Loading ...
Loading ...
Loading ...
373
5-4. Using the driving support systems
Owner’s Manual_USA_M6718BE_en
5
Driving
*
: If equipped
■ Function description
A smartphone can be used to
remotely operate the parking
functions and exit functions.
Also, assistance can be pro-
vided to remotely move the vehi-
cle forward or backward into a
garage, etc.
NOTICE
• When the position the vehicle is
stopped when assistance is
started differs from the position
when registration was per-
formed
• When the registered parking
space cannot be reached due to
the existence of parking blocks,
etc.
• When the road surface around
the parking space has changed
(road surface has degraded or
been resurfaced)
• When the sunlight conditions
differ from when registration
was performed (due to weather
or time of day)
• When the sun is shining directly
into a camera, such as in the
early morning or evening
• When the color or brightness of
the road surface is uneven
• When a light is temporarily
shined on the parking space
(lights of another vehicle, secu-
rity light, etc.)
• When the road surface around
the parking space has the same
repeating pattern
• When there is a low protrusion
on the road surface near the
parking space
• When the parking space is on a
slope
• When a camera has been
splashed by hot or cold water
and the lens has fogged up
• When a camera lens is dirty or
covered with water droplets
• When accessories which
obstruct the view of the camera
are installed
If assistance is ended during reg-
istration, perform registration
again.
● When registering a parking
space to the memory function, if
the road surface cannot be
detected “No available parking
space to register” will be dis-
played.
● When using the memory func-
tion, make sure to stop immedi-
ately in front of the stop
position. Otherwise the parking
space may not be able to be
detected correctly or assis-
tance may not be provided to
the point that the vehicle is fully
parked.
● Do not use the memory function
if a camera has been subjected
to a strong impact or images of
the panoramic view monitor are
misaligned.
● If a camera has been replaced,
as the installation angle of the
camera will have changed, it will
be necessary to reregister park-
ing spaces of the memory func-
tion.
Remote control function
*
Loading ...
Loading ...
Loading ...