THE FIRST TIME OR A LONG TIME NOT USE THE MACHINE
Retain This Instruction
For Future Reference
GCF20E
QUICK
START
GUIDE
Make sure to remove
the red silicone cap
from the bottom o f
water tank.
01
Make sure the steam
wand nozzle is clean
and no blocking.
03
Fill water into the water tank
NOT exceed the MAX line. Set
up the water tank vertically and
align the buckles to the hole on
the back of the machine, and
press it down to be parallel to
the top of the machine.
04
Plug in the power cord,
press " " power button,
all coffee indicators will
f lash the machine is
preheating.
05
Before making espresso,
make sure the knob is
on the " OFF " position.
02
Place a big cup under
the steam wand. When
all coffee indicators stay
on, turn on the steam
control knob slowly.
06
Let the water flow out of
the steam wand about
30~60seconds, then turn
OFF the Steam control
knob. This process is let
the water flow into the
empty pump for the first
use.
07
Place a cup on the drip
tray. Press the " " manual
button to flow out the hot
water to clean the filter
holder or the coffee cup.
Press the manual button
again to stop.
08
[email protected]1-844-801-8880
MAKE ESPRESSO ALONEFROTH MILK ALONE
------------------------------------------------------- -
03
Press the single-cup button or double-cup button the
espresso indicator will flash, the machine start brewing.
Note :
During the milk frothing, if lack of water, the machine will produce
louder noise and small steam, please refill in time.
Note : Be careful the hot surface of steam wand.
02
Prepare a pitcher with about 100ml / 3.4 fl.oz of milk. Insert the
steam wand nozzle into the milk about 0.4-0.8inch. Slowly
turn on the steam control knob to control the steam volume.
03
Froth milk in the way moving vessel round from up to down,
after the milk increase in volume by 2 times or the required
purpose is reached, turn the knob back to " OFF " position to
stop. Take away the pitcher.
04
In order to prevent the steam wand nozzle from blocking and
make it eaiser to clean, we suggest you to clean it immediately
after frothing milk.
05
Turn off the steam control knob.
Clean the steam nozzle with damp cloth / sponge.
02
Install the filter holder into the machine from " Unlock " to
" Lock " position. Place a cup on the drip tray.
05
Remove the filter holder from " Lock " to " Unlock " position.
Remove the coffee grounds and clean the filter holder by
water. Rinse the seal ring with wet cloth.
01
Press the " " steam button. Please wait the steam
indicator stop flashing. Otherwise it comes out with weak
steam, which will make bad frothing effect.
01
Insert the filter into the filter holder. Fill ground coffee into
the filter and press it with the tamp spoon. The ground
coffee should be pressed evenly and not too firmly.
Note : Be careful the hot water of machine brewer and hot coffee grounds.
04
The machine will stop automatically when coffe brewing
finished.
[email protected]1-844-801-8880
