Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned
herein.
Microphone Mic-M1S
User Manual
Caring For Your SYNCO Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
1. Insert the microphone body into
the shock mount. Make sure it is
secure and well-balanced.
Operations
2. Install the windshield to the front of
the microphone body.
4.Open the audio or video recording application on your device and begin
recording.
3. Connect the microphone with your device via corresponding output cable.
For camera series (camera, camcorder, audio recorder, and other audio/
video recording devices)
For phone series (smartphone, tablet, Mac)
① Attach the shock mount to the camera via the cold
shoe.
② Connect the microphone with the device via the
3.5mm TRS camera cable.
① Attach the shock mount to smartphone holder
(exclusive) via the cold shoe or thread.
② Connect the microphone with the device via the
3.5mm TRRS phone cable.
Camera Settings
As a plug-and-play microphone, M1S requires built-in power through the
microphone input of your camera. For the best performance, please set the
audio input of your camera as below.
Audio Input: Microphone Input
Audio Level/Gain Control: Manual (if possible)
Plug-in Power: Power On
Refer to the instructions provided with your camera for setup on audio
settings.
Specications
1. Polar Pattern: Cardioid
Loading ...
