Loading ...
Loading ...
Loading ...
LOW HEAT FLAME ADJUSTMENT
The burners on your Broilmaster accessories features an adjustable low setting.
Changes in gas pressure, gas conversion and even in the quality of the gas itself may affect burner performance at the
“LOW” setting. It could be either too high or too low.
To adjust the burner for low setting:
1. Make sure the gas appliance accessory is cool.
2. Remove the grates so that you can see the flame while
adjusting the burner.
3. Light the burner and set it to “LOW”
4. Pull off the control knob.
5. While holding the valve shaft with pliers, insert a thin
fl
at-blade screwdriver into the shaft and, while watching
the flame, adjust it to a minimum
stable setting.
Use a small screwdriver for low setting burner
adjustment as shown above.
SINGLE SIDE BURNER / DOUBLE SIDE BURNER
POWER BURNER FRONT / REAR FIRE RING
Using a long reach utility lighter, hold a flame over the burner ports while you push and turn the control knob of the
corresponding burner to the “lite” position. Keep your face as far away from the burner as possible.
If the burner does not light in 5 seconds, turn the knob off and wait 5 minutes before attempting again.
Read the ‘User Manual/Installation Instructions’ carefully and completely before using your accessory to reduce the risk of
fire, burn hazard or other injury.
LONG REACH LIGHTER - MANUALLY LIGHTING
LIGHTING INSTRUCTIONS FOR ALL GAS ACCESSORIES
•Press and 1/4 turn - Hold knob in and wait a few seconds
•Once you hear "Gas" turn to the left and you will hear a "CLICK" sound and the burner should ignite
•If the burner does not ignite Switch off wait 5 minutes and try again
POWER BURNER
•Push 1/4 turn and Hold knob in and wait a few seconds
•You will hear "GAS" flowing
•Turn to the LEFT and the Valve will "throw a flame" the the INNER or OUTER fire-ring depending
on the one you have chosen to ignite. If you are intending to use both fire-rings the procedure must
be done to each ring individual.
Page 18
PREMIUM GRILLS
LIGHTING INSTRUCTION & FLAME SETTING
SIDE BURNER / DOUBLE SIDE BURNER
Loading ...
Loading ...
Loading ...