Loading ...
Loading ...
Loading ...
19
Pilot won’t light. No gas supply.
Blocked pilot injector.
Ensure gas isolation valve is
turned ‘On’, and bottles are not
empty.
Call service provider.
Pilot goes out when gas control
knob released.
Releasing knob before thermo-
couple has heated.
Pilot flame too small.
- Gas pressure too low.
- Partially blocked pilot injector.
Thermocouple faulty.
Hold knob in for at least 20
seconds following ignition of
pilot.
Call service provider.
Call service provider.
Main burner will not light. Incorrect supply pressure.
Faulty gas control.
Call service provider.
Call service provider.
NOTE: Components having adjustments protected (e.g. paint sealed) by the manufacturer, are only
to be adjusted by an authorised service agent. They are not to be adjusted by an
unauthorised service person.
This section provides an easy reference guide to more common problems that may occur during operation
of your equipment. The fault finding guide in this section is intended to help you correct, or at least
accurately diagnose problems with your equipment.
Although this section covers most common problems reported, you may encounter a problem not covered
in this section. In such instances, please contact your local authorised service agent who will make every
effort to help you identify and resolve the problem. Please note that the service agent will require the
following information:-
Model Trade Name and Serial Number of Appliance. (Both can be found on Technical Data
Plate located on appliance).
For Refrigeration Cabinet Fault Finding refer to Refrigeration Cabinet Installation and Operation
Manual supplied with appliance.
Loading ...
Loading ...
Loading ...