Loading ...
Loading ...
Loading ...
InstallationKits Contents
Suggested Tool Requirements
NO. NAME OF PARTS Q_Y
i FRAME CURTAIN 2
2 SILL SUPPORT 2
3 BOLT 2
4 NUT 2
5 SCREW(TYPE A) 16
6 SCREW(TYPE B) 3
7 SCREW(TYPE C) 5
8 FOAM-STRIP 1
9 DRAIN PIPE 1
10 FOAM-PE 1
11 FRAME GUIDE 2
12 WINDOWLOCKINGBRACKET 1
13 FOAM-PE 1
I SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL
PREPARATION OF CHASSIS
Remove the screws which fasten the cabinet
at both sides and at the back
Slide the unit from the cabinet by gripping the
base pan handle and pulling forward while
bracing the cabinet.
2_
,
4_
Cut the window sash seal to the proper
length.
Peel off the backing and attach the foam-pe
@to the underside of the window sash,
Remove the backing from the top upper guide
Foam PE @ and attach it to the bottom of the
upper guide,
5. Attach the upper guide onto the top of the
cabinet with 3 type A screws.
,
,
Insert the frame guides @ into the bottom of
the cabinet.
Insert the Frame Curtain (:_.)into the upper
guide and frame guides @,
(Type A)
8. Fasten the curtains to the unit with 4 Type
A screws
(Type A)
Loading ...
Loading ...
Loading ...