Loading ...
Loading ...
Loading ...
Tips & Reminders
12
Tips & Reminders
Steam Cleaner Tips & Reminders
This steam cleaning appliance has many practical uses that have not
been mentioned in this manual. Please refer to the Cleaning Reference
Guild included with this manual for tips and suggestions of where and
how to use the Steam Cleaner. Alternatively visit the website at www.
euroex.com.au for additional information or contact our Customer
Support Line for assistance.
Steam cleaning allows the user to clean chemical-free by using the power
of steam, in place of harsh chemical-based cleaners. The heat from the
steam softens and loosens dirt on surfaces, while the steam pressure lifts
the dirt away. All that is left to do is to wipe the surface to remove the dirt
and moisture using a cotton cloth.
TIP: to get the best cleaning results use a microbre cloth to wipe the
dirt and moisture from the surface being cleaned. Microbre is designed
to pick up and hold dirt, a great aid in lifting and removing the dirt that
the steam cleaner has softened and loosened. Also, Microbre requires
moisture to glide over surfaces, the steam cleaner provides moisture
that the Microbre needs to glide. Microbre and Steam, a great
cleaning combination!
Making Contact with Surfaces
The steam is at its hottest just as it leaves the nozzle/accessory. This is
the area of the steam output that should be used to clean to achieve
maximum performance. All accessories should make direct contact with
the surfaces being cleaned to transfer the heat from the Steam Cleaner
to the surface in order to soften and loosen dirt. If the accessory being
used does not make contact with the surface, the desired results may not
be achieved. If assistance is required contact our Customer Support Line.
TIP: steam will clean hard, sealed, non-porous surfaces in place of harsh
chemical-based cleaners and detergents. For soft furnishings such
as carpets, rugs, lounges, children’s toys etc, steam will refresh and
deodorise the bres. Steam is not used to clean carpets, other than to
spot clean. To clean carpets proper carpet cleaning equipment should
be used.
Water
Use ordinary tap water for all cleaning. In hard water areas, we
recommend distilled or demineralised water to reduce the formation of
calcium and other mineral deposits in the Steam Cleaner. Use distilled or
demineralised water when steaming light coloured fabrics to eliminate
the possibility of hard water stains.
IMPORTANT: Do not add cleaning solutions, perfumes, oils or any other
chemicals to the water used in the Boiler.
Temperature
The temperature in the stainless steel Boiler reaches about 130°C. The
steam temperature just outside the tip of the nozzle/accessory is between
105°C and 115°C. The temperature of the steam falls to 38°C at a distance
of 25cm from nozzle. This Steam Cleaner produces a drier steam which
cools very rapidly to avoid burns and injuries. Steam must make direct
contact with surfaces for it to clean effectively.
TIP: the hot steam can be used to kill dust mites in soft furnishings and
mattresses. Steam cleaning is ideal for asthma sufferers, persons with
skin sensitivities and anyone with chemical sensitivities.
14
Loading ...
Loading ...
Loading ...