Loading ...
Loading ...
Loading ...
English
15
2. Mount the switchable jet pipe
(only with the Inno-Foam-Set)
■ Unscrew the standard jet pipe from the
hand gun.
■ Mount the switchable jet pipe on the
hand gun.
■ Mount the standard high pressure
nozzle on the long pipe of the
switchable jet pipe.
3. Mount the foam nozzle.
■ Mount the foam nozzle corresponding
to the Foam Set,
– on the short pipe of the switchable jet
pipe, or
– replace the standard high pressure
nozzle by a foam nozzle.
*Part of the nozzle pack
■ Place O-ring (3) in the ring groove of the
moulded part (4).
■ Place the HP-round nozzle (2) on the
neck of the moulded part.
■ Insert the nozzle with moulded part in
the foam nozzle.
■ Screw the pre-assembled foam
nozzle (1) to the jet pipe (5) and tighten
it with an open-ended wrench size 27.
Loading ...
Loading ...
Loading ...