Loading ...
Loading ...
Loading ...
English
14
1b) Assembly with HD 10/25 SX,
HD 13/18 SX
■ Switch off the high pressure cleaner.
■ Disconnect the power- and water
supplies.
■ Release the pressure by opening the
hand gun.
■ Unscrew the fastening screw (1) of the
hood.
■ Remove the hood (2) from the unit.
*Part of the nozzle pack
■ Unscrew the sealing screw (1) with a
size 8 Allen key.
■ Unscrew the standard injector cartridge
with a flat screwdriver 12x2.
■ Push O-rings (3) onto the injector
cartridge from the nozzle set (4) and
coat with a thin layer of silicone grease.
■ Push the injector cartridge into the
injector housing (2). Tighten the injector
cartridge hand tight with a flat
screwdriver 12x2.
■ Screw in and tighten the sealing
screw (1) (10 Nm).
*Part of the nozzle pack
■ Unscrew the locking screw (5).
■ Screw in and tighten the enclosed
locking screw.
■ Replace the unit hood and screw tight.
1c) Assembly in heated units
Here the existing dosing system in the unit
is used. No conversion is necessary. The
injector cartridge from the nozzle pack is
not needed.
Loading ...
Loading ...
Loading ...