Loading ...
Loading ...
Loading ...
27
9. Control Panel
SmartOnline SVX-Series UPS Operating Mode
Standby Bypass Line Battery Battery Test Fault Converter ECO
Nominal Battery Voltage Y Y
Battery Capacity in Ah Y Y Y Y Y Y
Maximum Charging Current Y Y
Battery Low Voltage Y Y Y Y Y Y
Battery Low Capacity Y Y Y Y Y Y
Battery Shutdown Voltage Y Y Y Y Y Y
Periodic Battery Test Y Y Y Y Y Y Y Y
Battery Test Interval Y Y Y Y Y Y Y Y
Stop by Time Y Y Y Y Y Y Y
Stop by Battery Voltage Y Y Y Y Y Y Y
Stop by Battery Capacity Y Y Y Y Y Y Y
Battery Age Alert Y Y Y Y Y Y Y Y
Temperature Compensation Y Y Y Y Y Y Y Y
Table 9.5
9.3.6.4 Pre-Alarm
The SETUP – PRE-ALARM screen may be accessed in any UPS operating mode. All settings may be made in any operating mode.
PRE-ALARM
Line Voltage Range
Line Frequency Range
Load
9.3.7 Information Screen
Use Down/Right key to select “INFORMATION” option. Press “Enter” key to enter Information sub-menu.
HOME
MENU
INFORMATION
Identification
System
Battery
The Information screens offer an overview of all the programmed UPS system states. A summary is provided below.
Identification
Data User Adjustable / Section Reference
Model Name No
Serial Number No
Display#ID Firmware Version No
STS# xx Firmware Version No
Module#ID DSP Firmware Version No
Module#ID MCU Firmware Version No
Module#ID Serial Number No
Module#ID DSP Firmware Version No
Module#ID MCU Firmware Version No
Module#ID Serial Number No
Set line voltage range. Upper limit: +5/10/15/20%; lower limit: -5/10/15/20%
(Default: +15%/-20%)
Set line frequency range. Upper limit: +1/2/3/4Hz; lower limit: -1/2/3/4Hz
(Default: +/-4Hz)
OVERLOAD: Set UPS overload (40-100%) (Default: 100%)
LOAD UNBALANCE: Set output load unbalance (20-100%)
Loading ...
Loading ...
Loading ...