Loading ...
Loading ...
Loading ...
Press the Power/Mode (C) button and the heater will cycle through ECO,
HIGH MED and LOW modes.
In the LOW, MED and HIGH modes the heater will continue to run uninterrupted as
the thermostat does not work in these modes.
SETTING THE TEMPERATURE
Press the thermostat (A) button and the temperature digits will blink.
Use the '+' and '-' buttons to set your desired temperature from 10-30 degrees
Celsius.
After the desired temperature is set the temperature digits will stop blinking and
the set temperature will be displayed.
The heater will change to ECO mode.
When the heater reaches the set temperature it will switch on and off
automatically to maintain the set temperature.
TURNING HEATER OFF
Press the stand-by button [F] until sleep mode is selected and the control panel
screen goes off.
Press the on/off switch [F] to turn the appliance off completely.
To disconnect the appliance, remove the plug from the socket.
Operating Your Oil Column Heater
CONTROL PANEL
A. Thermostat button
B. + Temperature & hours increase button
C. Mode button
D. Timer button
E. － Temperature & hours decrease button
F. Power/stand-by button
Loading ...
Loading ...
Loading ...