Loading ...
Loading ...
Loading ...
Page 6
Connect Spindeck MAX to your Audio System
Spindeck MAX requires a phono input suitable for use with a magnetic cartridge. Line-
level inputs (such as Aux, CD, Tuner, Tape or Video) are not suitable. If your amplier
does not have a suitable Phono input you will need a separate phono preamplier stage
for magnetic cartridges connected between the Spindeck MAX and a free line level input
of the amplier. Contact your dealer or support@andoveraudio.com if you need help
choosing an appropriate preamplier. Andover’s Spinbase products are all equipped with
an appropriate input.
Spindeck has a captive tonearm signal lead for connection to the amplier. The plug with
the red band or with an “R” marking should be attached to the RIGHT channel input jack,
and the plug with the white band or “L” marking is the LEFT channel.
The third individual wire is a GROUND wire. Connect this to the ground screw on
Spinbase or compatible amplier. If your amplier does not have a ground screw, slip
it under one of the screws which hold the amplier chassis together and tighten it
securely. Leaving this wire unattached will result in excessive hum.
Connect it to Power
The turntable is supplied with a power adapter. Plug the power adapter into the DC
power jack at the rear of Spindeck rst, then plug the adapter into your AC power.
Maintenance and Cleaning
Your record player requires little or no regular maintenance. Remove dust with a slightly
moistened antistatic cloth. Never use a dry cloth because this will create static electricity
which will attract more dust! Antistatic cleaning uids are available at specialist stores
but must be applied sparingly to avoid damage to rubber parts. To avoid damage it is
recommended to t the stylus cover before cleaning or maintenance is carried out.
If the player is not used over an extended period of time, the drive belt should be
removed to prevent unequal stretching.
Loading ...
Loading ...
Loading ...