Loading ...
Loading ...
Loading ...
4
10. It is best to clean the food mill immediately after use to prevent food from
drying in the holes of the milling disc.
Changing Discs
1. Carefully press down on the locking bar and rotate the locking bar
counterclockwise to release the handle assembly from the food
mill housing.
2. Remove the milling disc from the bottom of the food mill housing.
3. Place the new milling disc into the center of the food mill with the
dome-shaped surface facing up.
4. Follow the assembly instructions numbers 2–5 to complete the
assembly of the food mill.
Safety & Cleaning Rules
1. Before and after each use, disassemble and wash all parts of the
food mill that come into contact with food. Wash in hot, soapy
water. Rinse with clear water. Dry immediately. The food mill is
top-rack dishwasher safe.
2. Check that all parts are operating properly and perform the
intended functions. Check for alignment of moving parts or any
other conditions that may affect the operation. If the product is not
working properly contact Consumer Service.
3. Never use fingers to scrape food away from the milling disc while
PRIOR TO USING
It is best to pre-soften some foods prior to use. If the food is
firm, like potatoes, apples and pears, remember to soften them
by steaming or baking until tender before using them in the
food mill.
Loading ...
Loading ...
Loading ...