Loading ...
Loading ...
3
Assembly & Use Instructions
1. Place the milling disc of your choice
into the center of the food mill with
the dome-shaped surface facing up.
2. Insert the handle pin into the center
hole of the milling disc.
3. Position the locking bar so that both
sides are located beside both locking
tabs.
4. Firmly push down on the locking bar
and rotate clockwise, until it is lined
up with the locking tabs.
5. Slowly release the locking bar and
make sure it is properly connected
to the locking tabs.
6. Place the food mill over a bowl or
saucepan and add the food to be
milled into the food mill.
7. Turn the handle clockwise, turning
the blades over the milling disc to
mill the food.
8. The mashed food will fall through
the perforations and into the bowl.
It may be necessary to scrape food
off of the outside of the milling disc
and into the bowl using a rubber
spatula.
9. Discard any skin, seeds or fiber left
in the food mill after mashing is
complete.
Handle
Pin
Milling
Disc
Locking
Tab
Locking
Tab
Handle
Assembly
Handle
Blades
Locking
Bar
Figure 1
Figure 2
Loading ...
Loading ...
Loading ...