Loading ...
Loading ...
Loading ...
en operation
34
13.9 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡ The programme is set.
→"Setting a programme", Page32
¡ The programme end time is set
and activated.
→"Buttons", Page27
1. Press Start/Reload.
The activated programme end time
is paused.
2. Press Finished in until the display
shows the required programme
end time.
3. Press Start/Reload.
The changed programme end time
is activated.
13.10 Soaking laundry
Note:No additional detergent is re-
quired. The washing solution is then
used for washing.
1. Start the programme.
2. To pause the programme, after ap-
prox. 10 minutes, press Start/Re-
load.
3. To resume the programme, after
the desired soaking time, press
Start/Reload.
13.11 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
1. Press Start/Reload.
The appliance pauses.
Note:If you want to add laundry,
follow the instructions on the dis-
play.
→"Display", Page26
2. Open the door.
3. Add or remove laundry.
4. Close the door.
5. Press Start/Reload.
13.12 Cancelling the pro-
gramme
1. Press Start/Reload.
2. Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high, start
the Spin programme or select a
suitable programme for draining.
→"Programmes", Page28
3. Remove the laundry.
→"Unloading the laundry",
Page35
13.13 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
→"Buttons", Page27
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
1. Set the Spin programme or a pro-
gramme for draining the water.
→"Programmes", Page28
2. Press Start/Reload.
Loading ...
Loading ...
Loading ...