Loading ...
Loading ...
Loading ...
25
CLEANING YOUR APPLIANCE
Cleaning your oven accessories
Removing the trays and shelves from your appliance
• Slide the dish and shelves towards you until they
reach the front stop.
•
Tilt them up at the front to clear the side supports,
taking care not to spill the contents.
• Lift the dish and shelves clear.
• Wash the dish, insert and shelves in hot soapy water.
• Reverse the above steps to put the grill tray and
shelves back again.
• Ensure that they are placed between the 2 support
wires.
ARNING
Removing the side racks
1. Grasp the middle wire at the front.
2. Pull firmly inwards while pushing back.
RELEASING THE GRILL ELEMENT
WARNING
WARNING
Make sure the appliance is turned off before you remove
or replace parts, to avoid the possibility of electric shock.
Retaining wire models - The upper grill element is secured
with a hanger clip which can be removed to help clean
the oven cavity ceiling. To remove the hanging clip push
the sides of the clip in the direction of the arrows. After
cleaning raise the grill element and secure clip back into
position.
NOTE: Diagram shows a grill in oven model. Separate grill
models use the same hanger clip arrangement in the grill
compartment.
Rotating latch models - rotate latch 180
degrees and the
grill element will drop down freely. After cleaning, raise
the grill element and secure by rotating the latch back 180
degrees.
Loading ...
Loading ...
Loading ...