Loading ...
Loading ...
Loading ...
14
NOTE:
All maintenance operations should only be carried
out by a qualified service person.
To achieve the best results, cleaning must be
regular and thorough. All controls and mechanical
parts should be checked and adjusted periodically
by a qualified service person. If any small faults
occur, have them attended to promptly. Don't wait
until they cause a complete breakdown. It is
recommended that the appliance is serviced every
6 months.
The gas control valve should be dismantled and
greased every 6 months to ensure the correct
operation of the gas control valve.
To carry out this operation;-
a. Remove the gas control knobs from the gas tap
spindles by pulling the knobs away from the
control panel.
b. Remove the drip tray from the appliance.
c. Remove 2 screws on the underside of control
panel, securing the control panel to the hob.
d. Remove the control panel from the front of the
appliance.
e. Remove 2 screws holding shaft plate to gas
control body and remove control shaft and
plate. Note orientation of shaft for correct
re-assembly.
f. Using needle nose pliers or similar, pull out gas
control spindle, again noting its orientation.
g. Apply a suitable high temperature gas cock
grease or lubricant such as ROCOL - A.S.P (Anti
scuffing paste) / Dry Moly Paste to the outside of
the spindle.
h. Replace spindle and re-assemble the gas
control in reverse order.
i. Refit control panel and secure with 2 screws.
j. Refit the knobs to the gas control valve spindles.
a. Refit the trivet supports to the Cooktop, ensuring
that the trivet supports are correctly fitted.
NOTE:
It is imperative that the trivet supports are
correctly re-fitted to the appliance to ensure that
the burners and trivets locate correctly and sit
flush and level.
Note the orientation of the trivet supports when
re-fitting. The trivet support front side rail profiles
are different from the rear side rail profiles and
will only fit one way to the cooktop.
b. Refit burners and burner caps onto the cooktop.
c. Refit the trivets to the cook top, taking note that
the trivets are manufactured with a lip on one
edge, the lip must always be fitted to the outer
edge (front and back) of the range.
d. Refit the spill / grease tray(s) to the range.
Two Screws
Spindle
Loading ...
Loading ...
Loading ...