Loading ...
Loading ...
Loading ...
ASSEMBLY
CONNECT BATTERY (See Figs. 2 and 3)
CAUTION: Do not short battery termi-
nals. Before connecting battery, re-
move metal bracelets, wristwatch
bands, rings, etc.
Positive terminal must be connected
first to prevent sparking from acciden-
tal grounding.
• Remove cardboard packing from seat pan and iift seat
pan to raised position.
• Open battery box door.
• Remove terminal protective caps and discard.
• If this battery is put into service after month and year
indicated on label (label located between terminals)
charge battery for minimum of one hour at 6-I0 amps.
First connect RED battery cable to positive (+) terminal
with hex bolt, fiat washer, lock washer and hex nut as
shown. Tighten se_ureJy.
Connect BLACK grounding cable to negative (-) termi-
nal with remaining hex bolt. flat washer, lock washer
and hex nut. Tighter_ securely.
Close battery box door.
Open battery box door fcr:
Inspection for secure connections (to tighten hard-
ware).
• Inspection for corrosion.
• Testing battery.
• Jumping (if required}.
• Periodic charging.
POSITIVE
(RED) CABLE
DISCARD
TERMfNAL
PROTECTIVE
CAPS
LOCK
HEX WASHER
NUT FLAT
WASHER
HEX
BOLT
NEGATIVE
(BLACK) CABLE
SEAT
PAN
BOX DOOR
FIG. 3
INSTALL SEAT (See Fig. 4)
Adjust sea__eTore tightening adjustmen_ boit.
• Remove cardboard packing on seat pan.
• Place seat on seat pan and assemble shoulder boit.
• AssemDle adjustment bott, Iock washer and flat washer
loosely. Do not tighten.
• Tighten shoulder bolt securely.
• Lower seat into operating position and sit on seat.
• Slide seat until a comfortable position is reached which
allows you to press clutch/brake pedal all the way
down,
Get off seat without moving its adjusted position.
Raise seat and tighten adjustment bolt securely,
SEAT
SEAT PAN
SHOULDER
BOLT
ADJUSTMENT
BOLT
LOCK WASHER
.AT WASHER
FIG. 2 FIG. 4
8
Loading ...
Loading ...
Loading ...