Loading ...
Loading ...
Loading ...
– 12 –
8. Operating Instructions
Important: Read and understand all the safety
instructions listed in this manual before attempting
to assemble, operate or maintain this product.
ALWAYS ensure that all hose attachments are tightly
1.
The pump can be installed horizontally or
surface by screwing through the mounting holes (6)
Important:
as low as possible. The pump body should not be
Draper Tools recommends using an anti-siphon valve
(not supplied) on the outlet hose.
2.
3.
Important:
up to one minute. The maximum running time for the
pump when connected to a 24V source is ten minutes.
4.
squeeze the trigger to begin pumping.
Important: DO NOT depress the trigger until the
5. The nozzle has two speeds, and the trigger can be
a. Squeeze the trigger to the appropriate position
and hold it in place (Fig. 6).
For slower speeds, squeeze the trigger
roughly halfway; for faster speeds, squeeze the
trigger fully.
b.
the trigger to rest in one of the catches (Fig. 7).
c.
release the trigger.
6.
7.
CAUTION! If the pressure grows too high, the pump will
enter bypass mode and will no longer pump any uid.
DO NOT allow the pump to operate in bypass mode for
more than two minutes.
6Fig.
7Fig.
(18)
Loading ...
Loading ...
Loading ...