Schweigen BRB722ST Silent Multi Purpose Square Integrated Exhaust Fan and Ducting Kit

User Manual - Page 9

For BRB722ST.

PDF File Manual, 24 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
Page 9
IMPORANT
For more exible ducting instructions, refer page 17.
4. Installation
Wall Installation
This type of installation is similar to roof mounting, ensuring that the pipe extends at least 50mm past the wall
surface refer gure 2. If the pipe length is shortened, reproduce the power cord exit slot on the inside of the
wall.
NOTE: By decreasing the length of the duct from which specied (refer to installation instructions) there will
be an increase in airow and noise levels as a result. This increase in airow can cause movement of air to be
heard through the system and inhibit the system to run silently.
Figure 2: Wall installation
Wall
Wall Optional
Fitment Pipe
Optional Mounting Flange
(P40113MF*)
Optional Backdraft Shutter
150mm PVC Stormwater Pipe
From outside face of ange to end of pipe (or
wall if mounting ange not used)
50
50
Locking screws to be fully
tightened engaging in holes
Locking holes at 4 and 10 o’clock
Locking screws
Power cord to
240V supply
Seal with silicone or
urethane
Fill gap between pipe
and wall or t second
wall mount ange if
required
900
motor
*Optional wall mounting ange (P40113MF) is available
from Schweigen, please contact 1300 881 693.
Loading ...
Loading ...
Loading ...