Loading ...
Loading ...
Loading ...
57
YDP-184 Owner’s Manual
Recording Your Performance
3. Select the desired MIDI Song.
For instructions, refer to page 38.
4. Specify the start point you wish to re-record.
Use the [<]/[>] buttons to move the playback position (measure number)
to the desired point. Alternately, press the [R/K] (Play/Pause) button to
start playback, then press the [R/K] button again slightly prior to the
desired point.
If necessary, select the settings (Voice and other parameters).
Select the desired settings, if you wish to change the previous ones.
5. Press and hold the [REC] (Record) button for a second to
call up the display which lists the Recording Target Songs,
then select the Song selected in step 3, then press the [>]
button to enter the recording mode.
6. Use the [<]/[>] buttons to select a Track for re-recording.
7. Play the keyboard or press the [R/K] (Play/Pause) button
to start recording.
8. Press the [REC] (Record) button to stop recording.
9. Save the recorded performance by following step 5 on
page 53.
10.To hear the recorded performance, press the [R/K] (Play/
Pause) button.
NOTE
The time signature cannot be
changed when replacing the
part of an existing Song.
Loading ...
Loading ...
Loading ...