Loading ...
Loading ...
Loading ...
• Never cut through the swelling at the root of
the branch as this will slow down healing and
increase the risk of fungal attack.
• Use the stop at the base of the cutting head
to provide support during cutting. This will help
prevent the cutting attachment from bouncing on
the branch.
• Make an initial cut on the underside of the
branch before cutting through the branch. This
will prevent tearing of the bark, which could lead
to slow healing and cause permanent damage
to the tree. The cut should not be deeper than
⅓ of the branch thickness to prevent jamming.
Keep the chain running while you withdraw the
cutting attachment from the branch to prevent it
jamming.
To start a cold engine
1. Push the air purge bulb 10 times.
2. Move choke control to the full choke position.
3. Hold the body of the product on the ground with
your left hand. Do not step on the product. Pull
the starter rope handle slowly until you feel some
resistance.
Note: Do not pull the throttle trigger while you
start the engine.
4. Pull the starter rope handle 3 times with force.
CAUTION:
Do not pull the
starter rope until it stops. Do not
let go of the starter rope when it is
fully extended. Release the starter
rope slowly. Failure to obey these
instructions can cause damage to the
engine.
5. Move the choke control to the half choke
position.
6. Pull the starter rope handle until the engine
starts.
7. Let the engine run for 10 seconds.
8. Move the choke control to the no choke position.
To start a warm engine
1. Slowly push the air purge bulb 10 times.
2. Move the choke lever to the HALF CHOKE
position.
3. Pull the starter rope handle quickly until the
engine runs.
4. Move the choke lever to the NO CHOKE
position.
14
1780 - 002 - 20.04.2022
Loading ...
Loading ...
Loading ...