Loading ...
Loading ...
Loading ...
~ 13 ~
Important! Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice form
orange peel, butyric acid, cleanser that contain acetic acid.
Do not allow such substances to come into contact the appliance parts.
Do not use any abrasive cleaners
Remove the food from the freezer. Cover and store in a cool place.
Clean the appliance and the interior accessories with a cloth and lukewarm water. After cleaning wipe
with fresh water and rub dry.
After everything is dry place appliance back into service.
Replacing the lamp
Caution! Before replacing the lamp, please disconnect the appliance
from the mains power supply.
Lamp specificsation is listed on the rating label.
Follow the process below to replace the lamop:-
1. Set the temperature regulation knob to “0” to switch off the appliance
and unplug from the main power supply
2. Remove the lamp cover using a flat screwdriver
3. Unscrew the lamp
4. Fit in the new lamp and replace the cover
5. Plug the appliance back into the power supply and turn the
temperature knob to the correct possible.
Defrosting
The evaporator can progressively become covered with frost and will need to be removed.
DO NOT use sharp metal tools to scrape off frost from the evaporator as this can cause damage to the unit.
However, when the ice becomes very thick on the evaporator, complete defrosting should be carried out as
follows:
Unplug the unit from the mains socket
Remove all stored food, wrap in several layers of newspaper, and put in a cool place
Keep the door open, and place a basin underneath the appliance to collect the defrost water
When completely defrosted, dry the interior thoroughly
Replace the plug in the power socket to run the appliance again.
Loading ...
Loading ...