SereneLife SLSPA4RND User Guide

Loading ...

www.SereneLifeHome.com

CLEANING YOUR INFLATABLE POOL SPA

Detergent residues, dissolved solids from bathing suits and chemicals will gradually

accumulate in the water. To clean your Inatable Pool Spa, use soap and water then

rinse thoroughly.

Please note: DO NOT use hard brushes or abrasive cleaners.

REPAIRING PUNCTURES IN YOUR INFLATABLE POOL SPA

If your Inatable Pool Spa is torn/punctured, use repair patches. Completely dry area

to be repaired, apply strong adhesive to repair patch and then cover the damaged area.

Smooth the surface to remove any air bubbles. Leave to dry for 12 hours before using

the Inatable Pool Spa.

CLEANING & STORING AWAY YOUR INFLATABLE POOL SPA

HOW TO EMPTY YOUR INFLATABLE POOL SPA

1. Firstly, remove the Inatable Pool Spa plug from the electrical mains.

2. Remove the screw cap from the water outlet (L) (below the pump system of the

Inatable Pool Spa) ensuring the Drainage Plug (G) is still inserted to prevent

unexpected draining.

3. Screw the ination hose (D) onto the water outlet (L) and direct the open end of

the hose appropriately.

4. Remove the drainage plug from the outlet within the oor of the Inatable Pool

Spa, so the water can ow out.

5. Once drained use a sponge to absorb excess water; then operate air jet function

for up to 20 minutes (one full cycle) to drain any water and dry out the pipeline.

If not completely dry after rst cycle – repeat.

6. When draining has nished, remove the ination hose (D) and replace the drainage

plug (G) and water outlet cap (L).

HOW TO DEFLATE YOUR INFLATABLE POOL SPA

1. Locate the black two part air valve on the spa (see point 9) on ‘setting up your

Inatable Pool Spa’ item (K).

2. Fully unscrew and remove the rapid deation air valve turning anti-clockwise (K).

3. Fold the spa away carefully to direct and remove as much air as possible through

the open valve.

Loading ...

SereneLife SLSPA4RND Round Inflatable Pool Spa with Light