Loading ...
Loading ...
Loading ...
11
1. CONNECT WHITE TUBE FROM RO SYSTEM PURE
WATER OUTLET TO FRESH WATER STORAGE TANK
(POINT E to F)
2. Locate the blue PE tube and attach one end to the Fresh
Water Output, Point E, and the other end to the Fresh Water
Storage Tank, Point F.
3. At Point E, located on the RO system, you will see a blue
silicone plug and blue label with the words, “Pure Water
Output”. Remove the blue silicone plug by pulling out.
4. For a professional installation, measure and cut tube
square and to length. Note: To make it easier to move the
RO system around, cut the tube a little longer. This will
make it easier when replacing the filters.
5. Insert the blue PE tube from Point E into this water
connection.
Figure 19
k
Nuts
Sink Drain Pipe
3/8” Quic
Connect
Fitting
Drain
Adaptor
Halves
3/8” Hole - Do not drill
through Q.C. Fitting
Point D
Point C
STEP 6 – Connect PE Tubing Continued
Point E
Point F
Tubing connector
(Shutoff Valve)
Tank Nipple
Storage
Tank
CONNECT RED TUBE FROM RO SYSTEM TO DRAIN
SADDLE ADAPTER (POINT C to D)
1. Locate the red PE tube and attach one end to the Waste
Water Output, Point C, and the other end to the Drain
Saddle Adapter attached to the drain line under the sink,
Point D.
2. At Point C, located on the RO system, you will see a blue
silicone plug and blue label with the words, “Pure Water
Output”. Remove the blue silicone plug by pulling
downward. Note: You will notice that the water connec-
tion has a yellow water connection. This is to help you
identify this connection point as the waste water
connection point, see Figure 19.
3. For a professional installation, measure and cut tube
square and to length. Note: To make it easier to move the
RO system around, cut the tube a little longer. This will
make it easier when replacing the filters.
4. Insert the red PE tube from Point C into this water
connection.
Loading ...
Loading ...
Loading ...