Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/14662110-41523666310/bg21.png)
Troubleshooting (continued)
Burner(s) will not light
using ignitor.
(See Electronic ignition
Troubleshooting also)
Burner(s) will not
match light.
Sudden drop in gas
flow or low flame.
Flames blow out.
Flare-up.
ELECTRONIC iGNiTiON:
" No spark, no ignition noise.
" No spark, some ignition noise.
" Sparks, but not at electrode or at full
strength.
" See "GAS iSSUES:" on previous page.
" Match will not reach.
" improper method of match-lighting.
" Out of gas.
" Excess flow valve tripped.
" Vapor lock at coupling nut/LP cylinder
con nection.
" High or gusting winds.
" Low on LP gas.
" Excess flow valve tripped.
" Grease buildup.
" Excessive fat in meat.
" Excessive cooking temperature.
" Grease trapped by food buildup
around burner system.
" Burner and/or burner tubes are
blocked.
" Some dealers have older fill nozzles
with worn threads.
" Grease buildup or food particles in
end(s) of carryover tube(s).
" See Section I of Electronic ignition System.
" See Section II of Electronic ignition System.
" See Section III of Electronic Ignition System.
" Use long=stem match (fireplace match).
" See "Match=Lighting" section of Use and Care.
" Check for gas in LP cylinder.
" Turn off knobs, wait 30 seconds and light grill, if flames are still
low, turn off knobs and LP cylinder valve. Disconnect regulator.
Reconnect regulator and leak=test. Turn on LP cylinder valve,
wait 30 seconds and then light grill.
" Turn off knobs and LP cylinder valve. Disconnect coupling nut
from cylinder. Reconnect and retry.
" Turn front of grill to face wind or increase flame height.
" Refill LP cylinder.
" Refer to "Sudden drop in gas flow" above.
" Clean burners and inside of grill/firebox.
" Trim fat from meat before grilling.
" Adjust (lower) temperature accordingly.
Persistent grease fire. " Turn knobs to OFF. Turn gas off at LP cylinder. Leave lid in
position and let fire burn out. After grill cools, remove and clean
all parts.
Flashback... " Turn knobs to OFF. Clean burner and!or burner tubes. See
(fire in burner tube(s)), burner cleaning section of Use and Care.
Unable to fill LP " The worn nozzles don't have enough "bite" to engage the valve.
cylinder. Try a second LP dealer.
One burner does not " Clean carry-over tube(s) with wire brush.
light from other
burner(s).
464323313 ° 33
Loading ...
Loading ...
Loading ...