Loading ...
Loading ...
Loading ...
opt o,s
Thelight above the selected pad will be ON to indicate which OPTION hasbeen selected.
POWER Forusewith heavilysoiledand/or dried-on,baked-onsoils. This option
PRESOAK MUSTbe selectedPRIORto starting the cycle. Thisoption adds 16
minutes to the cycle time.
HI TEMP RINSE Turnson the heaterin all prerinseandfinal rinse cyclesto help prevent
spottingon dishware.Thisoption may beturned ONor OFFduringthe
washcycle.
HEATEDDRY Shutsoff the drying heatoptions.Dishesair dry naturallyandenergyis
OFF saved.Youcan propthe door openafter the light goesON next to the
word CLEANwhich appearsin the STATUSdisplayfor faster drying.
HEATEDDRY Turnsthe heateron for fast drying.This cyclewill extendthe time
ON to your washcycle by 30 minutes.NOTE:Cannotbe selectedwith
RINSE& HOLDcycle.
LOCK WhentheLOCKpadistouchedtwicewithin3 seconds,all padsbecome
inoperative.Youcanlockthecontrolsto preventanyse/ectionsfrombeingmade.
Oryoucanlockthecontrols"after youhavestarteda cycleorselectedDELAY
STARTsothecycleorDELAYSTARTis not interrupted
Children cannot accidentally start dishwasher by touching pads
with this option selected.
Tounlockthedishwasherafter it hasbeenlocked,touchthe LOCKpadtwice
within 3 seconds.The lightabovetheLOCKpadwill beoff.
DELAYSTART
Youcan delaythe start of a washcycle for up to 8 hours.Pressand hold
the BELAY STARTpadto choosethe numberof hoursyou want to delay
the startof thecycle.Themachinewill countdownandstart automatically
at the correcttime. NOTE:If you forget to lockthe door a remindersignal
will beepuntil you do so.
RESET
Tochangea cycleafter washingstarts, touch the START/RESETpadto
cancelthe cycle.After water is pumpedout and motorstops,you can
reprogramand restartthe dishwasher.
Start
Close the door until it locks into place and touch the START/RESETpadto
begin the (T(le. There is a time delay between stalt-up and water fill soyou
will not hear aW wash action fight awW.
The tTcle is complete when the light is 0Nnext to the word CLEANin the
STATUSdisplay.
NOTE."The dishwasher remembers your last wcle so you don't have to
reprogram each time. %qmn the dishwasher is loaded and door latch is
in the locked position, the conuol panel lights will be ONand displ W the
last settings you selected.
If you don't want to change aW of the settings, simply t(mch the
START/RESETpadto begin the (Tcle.
Also, if apower t_dlmeoccurs, NORMALand HEATEDORYx_illautomatically
be programmed. Make anynew selections and louch the START/RESET
pad Iobegin the cycle.
9
Loading ...
Loading ...
Loading ...