NEXT START TIME
DIAL—Rotate the dial to customize your
+/- BUTTONS—Use these buttons to adjust
time and program.
RAIN DELAY—While in AUTO press to
activate Rain Delay.
ARROW—Moves cursor around the screen
STATION—Moves between Station 1
and Station 2.
MANUAL/CLEAR—Press to water manually or
to clear programming.
RESET—Press to reset back to factory settings.
AUTO—Timer waters according to your
SET CLOCK—Set the time of day.
START TIME—Select what time you would
like to start watering.
HOW LONG—Determine how long to water
HOW OFTEN—Choose how often you will water
OFF—Turn off all watering.
INSTALLING THE BATTERIES
1. Remove the tray on the back of the timer by
sliding or pulling it out.
2. Insert two AAA (1.5V) alkaline batteries (not
included) and replace the tray.
NOTE: Firmly replace the battery tray to ensure
water resistance and increase battery life. You will
know the battery tray is fully inserted if it does not
pull out easily. Used up or dead batteries must be
removed from the timer and disposed of properly.
Replace batteries when low battery icon appears on
display. Do not dispose of batteries in fire. Batteries
may explode or leak.
PROGRAMMING THE TIMER
SET CLOCK AND DAY
1. Turn dial to SET CLOCK.
2. Using the +/- buttons, set the time of day,
including AM and PM. Timer advances faster if
button is held down.
3. Press the ARROW button to set current day.
4. Press the +/- buttons to move between and
select the current day of the week. Press the
ARROW button to toggle back to the time
5. Turn dial to save changes
Printers are responsible
for meeting print
Any changes must be
approved by Orbit
Printed piece must meet
on this form.
© 2015 Orbit Inc.
This work is the property
, and cannot be
used, reproduced or
distributed in any way
without their express
Folded Flat Additional Information
PRIN TERS ARE
REQUIRED TO MATCH
ALL SP ECIFIED
DESIGNER: SH MARKETING: SW
SOFTWARE: Adobe Indesign CS6
ARTWORK №: 5654424 rB
A start time is the time of day that the timer
will begin to water. This timer features three
1. Turn dial to START TIME.
2. Press the ARROW button to move through start
times; A, B, and/or C.
3. Using the + / - buttons, set your first start time,
including AM and PM. Timer advances faster
if button is held down. A box is placed around
each programmed start time.
NOTE: To remove a start time press CLEAR.
4. Press the STATION button to move through
stations; 1 or 2.
5. Press the + / - buttons to toggle the stations
on/off. Note: All stations are automatically
selected when a start time is added.
Press the - button to toggle a station off.
6. Repeat steps 2 - 5 to program additional
7. Turn dial to save changes.
NOTE: Only one start time is required.
1. Turn dial to HOW LONG.
2. Press the STATION button to move through and
select a station; 1 or 2.
3. Using the +/- buttons, select watering duration
from 1 to 360 minutes for each desired station.
Timer advances faster if button is held down.
NOTE: To remove a watering duration press CLEAR.
4. Turn dial to save changes.
Important, please read!
1 Dial 2 Outlet
HOSE FAUCET TIMER
NEXT START TIME
When expecting freezing temperatures,
timers should be removed from the hose
faucet and stored indoors to avoid potential
Filter traps dirt particles, prolonging
life of timer. Clean filter regularly and
replace if worn.